Armoured Cable CERVICORD VOVMV R 300500V FB RH CPR

Armored and screened instrumentation and control cable designed for use in industrial processes in fixed installations when certain electromagnetic protection is necessary. Specially recommended when good mechanical protection and/or against the action of rodents is required. Thanks to the special hydrocarbon-resistant PVC oute sheath, specially recommended for installations in the

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Armoured Cable CERVICORD VOVMV-R 300/500V FB RH CPR
~\ImgCli\FOTO2_1059.jpg
Armored and screened instrumentation and control cable designed for use in industrial processes in fixed installations when certain electromagnetic protection is necessary. Specially recommended when good mechanical protection and/or against the action of rodents is required. Thanks to the special hydrocarbon-resistant PVC oute sheath, specially recommended for installations in the Oil and Gas industry. With blue outer sheath, suitable for installation in intrinsically safe circuits.
Protegido electromagneticas
No propagador de la llama
No propagador incendio
Hidrocarburos
Anti roedores
Enterrado directo
Construction
1. Conductor
Stranded bare copper wires
Class II according IEC 60228
2. Insulation
PVC (Polyvinyl chloride)
Identification: Blue, Black.
(Numbered, only in case of multi-pair cables)
3. Composition
Twisted pairs laid up together
4. Overall screen
Aluminium/polyester tape + flexible drain wire Cu-Sn
Overlap: 25%
Coverage: 100%
5. Inner sheath
PVC (Polyvinyl chloride)
6. Armour
Galvanised steel wire armour
7. Outer sheath
Special PVC RH compound (Polyvinylchloride)
Colour: Black (See attached table for other)
Technical characteristics
1. Operating voltage
300/500 V
2. Test Voltage
2000 V
3. Operating Tª (conductor)
Fixed installation: 15°C to +70°C
Dureing installation: 0°C Min.
4. Insulation resistance
>10 MOhm x Km
5. Capacitance
250 pF/m Max.
6. L/R ratio
25 µH/Ohm Max. (Cross sectional areas up to 1mm2, including)
40 µH/Ohm Max. (Cross sectional areas of 1,5mm2)
Standards / Properties
1. Ref. standard for drawing
According EN 50288-7
2. CPR Classification (Euroclass)
Eca
(According UNE-EN 50575)
3. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
4. Fire Retardant
UNE-EN 60332-3 (IEC 60332-3)
5. Hydrocarbon resistant
UIC 895-OR