Shielded cable Cerviflam Z1C4Z1 K AS 061 kV CPR

Flexible shielded power and control cable, designed for use in industrial processes in fixed installations. Especially recommended when good electromagnetic protection and good fire performance is required.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Shielded cable Cerviflam Z1C4Z1-K (AS) 0,6/1 kV CPR
~\ImgCli\FOTO2_207.jpg
Flexible shielded power and control cable, designed for use in industrial processes in fixed installations. Especially recommended when good electromagnetic protection and good fire performance is required.
Protegido electromagneticas
No propagador de la llama
No propagador incendio
Libre halogenos
Flexible
Baka corrosividad gases
Construction
1. Conductor
Flexible bare copper wires
Class V Acc. to UNE-EN 60228
2. Insulation
Halogen free compound
Identification: HD 308 S2 (See attached table)
3. Composition
Insulated conductors laid-up together
4. Screen
Bare copper wire braid
Coverage: 60%
5. Outer sheath
Halogen free compound
Colour: Green
Technical characteristics
1. Operating voltage
600/1000 V
2. Test Voltage
3500 V
3. Operating Tª (conductor)
Fixed installation: -15°C to +70°C
During installation: 0°C Min.
Short-circuit (Max. 5 seg): 160°C
4. Min. bending radius
8xD
Standards / Properties
1. Ref. for construction/drawing
Special design, based on IEC 60502-1.
2. CPR Classification (Euroclass)
Eca
(According to UNE-EN 50575)
*IMPORTANT NOTE: This information (CPR classification) must be confirmed in case of order against existing stock at that time.
3. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
4. Fire Retardant
UNE-EN 60332-3 (IEC 60332-3)
5. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
6. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity =< 10µS/mm)
7. Low smoke emission
UNE-EN 61034 (IEC 61034)