cat 5e cable cervicom data futp lshf cpr

Shielded Category 5e halogen free data transmission cable for local area networks (LAN) in fixed installations, both dry and wet.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cat. 5e - Cable Cervicom DATA F/UTP LSHF CPR
~\ImgCli\FOTO2_1260.jpg
Shielded Category 5e halogen free data transmission cable for local area networks (LAN) in fixed installations, both dry and wet.
Protegido electromagneticas
No propagador de la llama
Libre halogenos
Humos baja opacidad
Baka corrosividad gases
Technical characteristics
1. Test Voltage
1000 V (DC, 1 min)
2. Weight
38 Kg/Km
3. Outer diameter
5,9 mm
4. Min. bending radius
Fixed installation (without load): 4xD
During installation (with load): 8xD
5. Insulation resistance
2000 MOhm*Km Min. (500V)
6. Characteristic Impedance
100 ± 5 Ohm (at 100 MHz)
7. Velocity of propagation
67%
8. Operating Tª
Fixed installation: -20°C to +60°C
During installation: 0°C to +50°C
9. Resistance unbalance
2% Max.
10. Capacitance unbalance
1500 pF/Km Max. (Pair-Ground)
11. Loop resistance
190 Ohm/Km Max.
12. Mutual capacitance
Nominal 48 pF/m (at 800Hz)
13. Propagation delay
Nominal 535 ns/100m
14. Transfer Impedance
Max. 50 mOhm/m (at 1 MHz)
Max. 100 mOhm/m (at 10 MHz)
Max. 200 mOhm/m (a 30 MHz)
15. Coupling attenuation
55 dB Min.
16. Segregation class
"c"
Construction
1. Conductor
Bare copper wire
Diameter: 0,51 mm (AWG24)
2. Insulation
Polyethylene
Diameter: 1,1 mm
3. Assembly
4 twisted pairs laid up together
4. Composition
Two insulated conductors twisted together as a pair
5. Overall screen
Aluminium/polyester tape + tinned copper drain wire (AWG24)
6. Outer sheath
Halogen free compound
Standard colour: Grey (RAL 7035)
7. Pair Screen
-
Standards
1. CPR Classification (Euroclass)
Dca-s2,d2,a2
(According to UNE-EN 50575)
Standards / Properties
1. Flame Retardant
UNE-EN 603332-1 (IEC 60332-1)
2. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
3. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity =< 10µS/mm)
4. Low smoke emission
UNE-EN 61034 (IEC 61034)
5. Ref. standard for drawing
EN 50173-1; EN 50288-2-1
ISO/IEC 11801; IEC 61156-5
TIA/EIA-568-C.2
IEEE 802.3at