cat 6 cable cervicom data uftp pe outdoors

Shielded Category 6 data transmission cable for local area networks (LAN) in outdoor fixed installations.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cat. 6 - Cable Cervicom DATA U/FTP PE (Outdoors)
~\ImgCli\FOTO2_1313.jpg
Shielded Category 6 data transmission cable for local area networks (LAN) in outdoor fixed installations.
Protegido electromagneticas
Resistente UV
Construction
1. Conductor
Bare copper wire
Diameter: 0,56 mm (AWG23)
2. Insulation
FoamSkin PE (Foam polyethylene)
Diameter: 1,35 mm
3. Composition
Two insulated conductors twisted together as a pair
4. Pair Screen
Aluminium/Polyester tape in "S" shape helically applied on two pairs covering each of them individually
5. Assembly
4 shielded pairs laid up together
6. Overall screen
-
7. Outer sheath
PE (UV stabilised)
Colour: Black
Technical characteristics
1. Outer diameter
8,6 mm
2. Weight
62 Kg/Km
3. Operating Tª
Fixed installation: -20°C to +60°C
During installation: 0°C to +50°C
4. Min. bending radius
Fixed installation (without load): 4xD
During installation (with load): 8xD
5. Loop resistance
176 Ohm/Km Max.
6. Resistance unbalance
2% Max.
7. Insulation resistance
2000 MOhm*Km Min. (500V)
8. Mutual capacitance
Nominal 43 pF/m (at 800Hz)
9. Capacitance unbalance
1500 pF/Km Max. (Pair-Ground)
10. Characteristic Impedance
100 ± 5 Ohm
11. Velocity of propagation
79%
12. Propagation delay
Nominal 450 ns/100m
13. Test Voltage
1000 V (DC, 1 min)
14. Transfer Impedance
Max. 50 mOhm/m (at 1 MHz)
Max. 100 mOhm/m (at 10 MHz)
Max. 200 mOhm/m (at 30 MHz)
15. Coupling attenuation
55 dB
16. Segregation class
-
Standards / Properties
1. Ref. standard for drawing
TIA/EIA-568-B.2-10 Draft 5.0
ISO/IEC 11801; IEC 61156-5
EN 50173; EN 50288-10 Draft