cabling system ftp cat6

The Cat6 F/UTP structured cabling system allows a generic telecommunications infrastructure to be set up within a building, creating a local area network (LAN). Category 6 is described in the TIA/EIA 568B.2-1, ISO/IEC 11801 and EN 50173-1 standards and can work at speeds of up to 1000Mbps within an Ethernet

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cabling System FTP Cat.6
~\ImgCli\FOTO2_1305.jpg
The Cat6 F/UTP structured cabling system allows a generic telecommunications infrastructure to be set up within a building, creating a local area network (LAN). Category 6 is described in the TIA/EIA 568B.2-1, ISO/IEC 11801 and EN 50173-1 standards and can work at speeds of up to 1000Mbps within an Ethernet environment, and can also carry other signals such as basic telephony, TokenRing and ATM services. Designed for transmission at frequencies up to 250MHz. The complete Cat6 FTP cabling system includes LSHF cable, female modules, 24-panel panels, patch panels, and various sized and colored hoses. With star-shaped center fill to maintain and increase cable performance. A clear Mylar tape wraps around the assembly and there is an aluminum tape screen with 24AWG drain wire. The aluminum display provides protection against electromagnetic interference (EMI) that can affect when transmitting data at high frequencies.
No propagador de la llama
Libre halogenos
Humos baja opacidad
Baka corrosividad gases
Construction
1. Conductor
23AWG solid bare copper
2. Insulation
Polyethylene
3. Composition
Two twisted insulated conductors forming a pair
4. Assembly
4 twisted pairs wired together
Star-shaped central filler
5. Screen
Transparent Mylar tape
Aluminium tape screen
Drain wire AWG24
6. Outer sheath
Halogen-free
IEC 62321, US EPA 3540C, BS EN 14582
Colour standard: Violet
Technical characteristics
1. Outer diameter
7.2mm
2. Operating Tª
Fixed installation: -10°C to +60°C
During installation: 0°C to +50°C
3. Velocity of propagation
72%
4. Min. bending radius
Fixed; 4 x D
During installation: 8 x D
5. Weight
5.08 Kg/100m
Standards / Properties
1. Ref. standard for drawing
Category 6: TIA/EIA 568?B.2-1, EN50173-1 and ISO/ IEC 11801
2. Flame Retardant
EN 60332-1-2 and EN 50399
3. Halogen free
EN 60754-1/2
4. Low smoke emission
EN 61034-2
5. CPR Classification (Euroclass)
EN 50575:2014 A1:2016
Dca s2 d2 a2