cat 6 cable cervicom data uftp lshf cpr

Shielded Category 6 halogen free data transmission cable for local area networks (LAN) in fixed installations, both dry and wet.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cat. 6 - Cable Cervicom DATA U/FTP LSHF CPR
~\ImgCli\FOTO2_1306.jpg
Shielded Category 6 halogen free data transmission cable for local area networks (LAN) in fixed installations, both dry and wet.
Protegido electromagneticas
No propagador de la llama
Libre halogenos
Humos baja opacidad
Baka corrosividad gases
Technical characteristics
1. Test Voltage
1000 V (DC, 1 min)
2. Weight
44 Kg/Km
3. Outer diameter
6,5 mm
4. Min. bending radius
Fixed installation (without load): 4xD
During installation (with load): 8xD
5. Insulation resistance
2000 MOhm*Km Min. (500V)
6. Characteristic Impedance
100 ± 5 Ohm (at 100 MHz)
7. Velocity of propagation
79%
8. Operating Tª
Fixed installation: -20°C to +60°C
During installation: 0°C to +50°C
9. Resistance unbalance
2% Max.
10. Capacitance unbalance
1500 pF/Km Max. (Pair-Ground)
11. Loop resistance
154 Ohm/Km Max.
12. Mutual capacitance
Nominal 43 pF/m (at 800Hz)
13. Propagation delay
Nominal 427 ns/100m
14. Transfer Impedance
Max. 50 mOhm/m (at 1 MHz)
Max. 100 mOhm/m (at 10 MHz)
Max. 200 mOhm/m (at 30 MHz)
15. Coupling attenuation
55 dB
16. Segregation class
"c"
Construction
1. Conductor
Bare copper wire
Diameter: 0,56 mm (AWG 23)
2. Insulation
FoamSkin PE (Foam polyethylene)
Diameter: 1,35 mm
3. Assembly
4 shielded pairs laid up together
4. Composition
Two insulated conductors twisted together as a pair
5. Overall screen
-
6. Outer sheath
Halogen free compound
Colour: Blue (RAL 5012)
7. Pair Screen
Aluminium/Polyester tape in "S" shape helically applied on two pairs covering each of them individually
Standards
1. CPR Classification (Euroclass)
Dca-s2,d2,a1
(According to UNE-EN 50575)
Standards / Properties
1. Flame Retardant
UNE-EN 603332-1 (IEC 60332-1)
2. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
3. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity =< 10µS/mm)
4. Low smoke emission
UNE-EN 61034 (IEC 61034)
5. Ref. standard for drawing
TIA/EIA-568-C.2
ISO/IEC 11801; IEC 61156-5
EN 50173; EN 50288-6-1
IEEE 802.3at