cat 6 cable cervicom data uutp pe outdoors

Category 6 data transmission cable for local area networks (LAN) in outdoor fixed installations.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cat. 6 - Cable Cervicom DATA U/UTP PE (Outdoors)
~\ImgCli\no-foto.jpg
Category 6 data transmission cable for local area networks (LAN) in outdoor fixed installations.
Technical characteristics
1. Test Voltage
1000 V (DC, 1 min)
2. Weight
36 Kg/Km
3. Outer diameter
6 mm
4. Min. bending radius
Fixed installation (without load): 40mm Min.
During installation (with load): 80mm Min.
5. Insulation resistance
2000 MOhm*Km Min. (500V)
6. Velocity of propagation
66%
7. Operating Tª
Fixed installation: -20°C to +60°C
During installation: 0°C to +50°C
8. Resistance unbalance
2% Max.
9. Capacitance unbalance
1500 pF/Km Max. (Pair-Ground)
10. Loop resistance
165 Ohm/Km Max.
11. Mutual capacitance
Nominal 43 pF/m (at 800Hz)
12. Propagation delay
Nominal 427 ns/100m
13. Transfer Impedance
-
14. Coupling attenuation
-
15. Segregation class
-
Construction
1. Conductor
Bare copper wire
Diameter: 0,56 mm (AWG23)
2. Insulation
Polyethylene
Diameter: 1,04 mm
3. Assembly
4 pairs laid up together with non-metallic cross separator
4. Composition
Two insulated conductors twisted together as a pair
5. Overall screen
-
6. Outer sheath
PE (UV stabilised)
Colour: Black
7. Pair Screen
-
Standards / Properties
1. Ref. standard for drawing
TIA/EIA-568-C
ISO/IEC 11801; IEC 61156-5
EN 50173; EN 50288-6-1