cabling system utp cat6

The UTP Cat6 structured cabling system allows a generic telecommunications infrastructure to be set up within a building, creating a local area network (LAN). Category 6 is described in the TIA/EIA 568B.2-1, ISO/IEC 11801 and EN 50173-1 standards and can work at speeds of up to 1000Mbps within an Ethernet

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cabling system UTP Cat.6
~\ImgCli\FOTO2_1287.jpg
The UTP Cat6 structured cabling system allows a generic telecommunications infrastructure to be set up within a building, creating a local area network (LAN). Category 6 is described in the TIA/EIA 568B.2-1, ISO/IEC 11801 and EN 50173-1 standards and can work at speeds of up to 1000Mbps within an Ethernet environment, and can also carry other signals such as basic telephony, TokenRing and ATM services. Designed for transmission at frequencies up to 250MHz. The complete Cat6 UTP cabling system includes LSHF cable, female modules, 24- or 48-port panels, 50-port telephone panels, management panels, and multicolored, customizable hoses. With star-shaped center fill to maintain and increase cable performance.
No propagador de la llama
Libre halogenos
Humos baja opacidad
Baka corrosividad gases
Technical characteristics
1. Weight
4.10 Kg/100m
2. Outer diameter
6.2 ± 0.3mm
3. Min. bending radius
Fixed: 4 x D
During installation: 8 x D
4. Operating Tª
Fixed installation: -20°C to +75°C
During installation: 0°C to +60°C
5. Velocity of propagation
69%
Construction
1. Conductor
23AWG Solid Copper
2. Insulation
Polyethylene
3. Assembly
4 twisted pairs wired together
Star-shaped central filler
4. Composition
Two twisted insulated conductors forming a pair
5. Outer sheath
Halogen-free compound
Standard colour: Violet
Standards
1. CPR Classification (Euroclass)
EN 50575:2014 A1:2016
Dca s2,d2,a1
Standards / Properties
1. Flame Retardant
IEC 60332-1-[1,2] (2004-07), IEC 60754-(1,2)
2. Halogen free
UNE-EN 60754 (IEC 60754)
3. Low smoke emission
EN50399, IEC 61034-(1,2)
4. Ref. standard for drawing
TIA/EIA 568-B.2-1, EN50173-1, ISO/IEC 11801