cat 6 cable cervicom data uutp pvc cpr

Category 6 data transmission cable for local area networks (LAN) in fixed installations, both dry and wet.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cat. 6 - Cable Cervicom DATA U/UTP PVC CPR
~\ImgCli\FOTO2_1290.jpg
Category 6 data transmission cable for local area networks (LAN) in fixed installations, both dry and wet.
No propagador de la llama
Technical characteristics
1. Test Voltage
1000 V (DC, 1 min)
2. Weight
36 Kg/Km
3. Outer diameter
5,3 mm
4. Min. bending radius
Fixed installation (without load): 4xD
During installation (with load): 8xD
5. Insulation resistance
5000 MOhm*Km Min. (500V)
6. Characteristic Impedance
100 ± 5 Ohm (at 100 MHz)
7. Velocity of propagation
67%
8. Operating Tª
Fixed installation: -20°C to +60°C
During installation: 0°C to +50°C
9. Resistance unbalance
2% Max.
10. Capacitance unbalance
1500 pF/Km Max. (Pair-Ground)
11. Loop resistance
176 Ohm/Km Max.
12. Mutual capacitance
Nominal 48 pF/m (at 800Hz)
13. Propagation delay
Nominal 535 ns/100m
14. Transfer Impedance
-
15. Coupling attenuation
-
Construction
1. Conductor
Bare copper wire
Diameter: 0,54 mm (AWG23)
2. Insulation
Polyethylene
Diameter: 0,95 mm
3. Assembly
4 pairs laid up together with non-metallic cross separator
4. Composition
Two insulated conductors twisted together as a pair
5. Overall screen
-
6. Individual screen
-
7. Outer sheath
PVC
Standard colour: Blue (RAL 5012)
Standards
1. CPR Classification (Euroclass)
Eca
(According to UNE-EN 50575)
Standards / Properties
1. Flame Retardant
UNE-EN 603332-1 (IEC 60332-1)
2. Ref. standard for drawing
TIA/EIA-568-C.2
ISO/IEC 11801; IEC 61156-5
EN 50173; EN 50288-6-1
IEEE 802.3at