cabling system utp cat6a

The Cat6A UTP structured cabling system allows a generic telecommunications infrastructure to be set up within a building, creating a local area network (LAN). Category 6A is described within the TIA and ISO EN standards for class Ea and category 6A, and allows working at speeds of up to 10Gbps

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cabling System UTP Cat.6A
~\ImgCli\FOTO2_1294.jpg
The Cat6A UTP structured cabling system allows a generic telecommunications infrastructure to be set up within a building, creating a local area network (LAN). Category 6A is described within the TIA and ISO EN standards for class Ea and category 6A, and allows working at speeds of up to 10Gbps within an Ethernet environment, and can also carry other signals as basic telephony, TokenRing and ATM services. Designed for transmission at frequencies up to 500MHz. The complete Cat6A UTP cabling system includes LSHF cable, female modules, 24-panel panels, patch panels, and multicolor and different sizes patch cords. With star-shaped center fill to maintain and increase cable performance.
No propagador de la llama
Libre halogenos
Humos baja opacidad
Baka corrosividad gases
Technical characteristics
1. Weight
48 kg/km
2. Outer diameter
8.3 ± 0.3 mm
3. Min. bending radius
Fixed: 33mm
During installation: 66mm
4. Operating Tª
Fixed installation: -10°C to +60°C
During installation: -10°C to +60°C
5. Velocity of propagation
66.7%
Construction
1. Conductor
23AWG Bare Solid Copper
Diameter: 0.56 ± 0.01 mm
2. Insulation
Polyethylene
Diameter: 1.04 ± 0.05 mm
Thickness: 0.22 mm
3. Assembly
4 twisted pairs wired together
Star-shaped central filler
4. Composition
Two twisted insulated conductors forming a pair
5. Outer sheath
Halogen-free compound
Low smoke emission, halogen-free
Standard color: Blue
Standards
1. CPR Classification (Euroclass)
EN 50575:2014 A1:2016
Dca s2, d2, a1
Standards / Properties
1. Flame Retardant
IEC 60332-1-[1,2]:2004
2. Halogen free
UNE-EN 60754 (IEC 60754)
3. Low smoke emission
IEC 61034-[1,2]
4. Ref. standard for drawing
ISO/IEC 11801:2002 (Ed. 2.2), IEC 61156-5 ed2.0, EN 50173-1:2011, EN 50173-2:2007 A1:2010, EN 50288-11-1:2012, ANSI/TIA-568-C.2:2009