wiring cable cerviflam h07z1 k as cpr

Unsheathed single core cables for fixed installations, lighting and control and monitoring equipment. Installed in ducts (above ground or recessed) or similar closed systems. Especially recommended in places where a low level of fumes and corrosive gases is required in case of fire. Especially recommended for installations in public places

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Wiring cable Cerviflam H07Z1-K (AS) CPR
~\ImgCli\FOTO2_215.jpg
Unsheathed single core cables for fixed installations, lighting and control and monitoring equipment. Installed in ducts (above ground or recessed) or similar closed systems. Especially recommended in places where a low level of fumes and corrosive gases is required in case of fire. Especially recommended for installations in public places (according to ITC-BT 28) and in general in all locations where a safe behavior of the cable before the fire is required. According to the Low Voltage Regulation REBT 2002: ITC-BT-09, 15, 20, 26, 28, 29, 30, 31, 41.
No propagador de la llama
No propagador incendio
Libre halogenos
Humos baja opacidad
Flexible
Baka corrosividad gases
Construction
1. Conductor
Flexible polished coppper wire
Class V according UNE-EN 60228
2. Insulation
Halogen free compound (Type TI7)
Identification: Colours
Technical characteristics
1. Operating voltage
450/750 V
2. Test Voltage
2500 V
3. Operating Tª
Fixed installation: -15°C to +70°C
Dureing installation and transport: 0°C
Storage: +40°C
Shortcut (Max. 5seg): +160°C
4. Min. bending radius
4xD (Diameter <= 8 mm)
5xD (Diameter <= 12 mm)
6xD (Diameter > 12 mm)
Standards / Properties
1. Ref. for construction/drawing
UNE 211002, UNE-EN 50525-3-31 (Type 2)
2. CPR Classification (Euroclass)
Cca-s1b,d1,a1
(According standard UNE-EN 50575)
3. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
4. Fire Retardant
UNE-EN 60332-3 (IEC 60332-3)
5. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
6. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity <= 10µS/mm)
7. Low smoke emission
UNE-EN 61034 (IEC 61034)