cable cervicom bus eib knx lshf cpr

Halogen free cable for control of domotic systems in buildings. In accordance with the EIB (European Installation Bus) and KNX systems. Generally used to control lighting, blinds, heating, ventilation, indicator boards, etc ...

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Cervicom BUS EIB-KNX LSHF CPR
~\ImgCli\FOTO2_1061.jpg
Halogen free cable for control of domotic systems in buildings. In accordance with the EIB (European Installation Bus) and KNX systems. Generally used to control lighting, blinds, heating, ventilation, indicator boards, etc ...
Protegido electromagneticas
No propagador de la llama
Libre halogenos
Humos baja opacidad
Baka corrosividad gases
Construction
1. Conductor
Stranded bare copper wires 0,80mm
2. Insulation
Polyethylene ADPE
Identification:
· 1 pair: Red-Black
· 2 pairs: Red-Black + White-Yellow
3. Composition
1 pair: Twisted pair laid-up together
2 pairs: Star Quad
4. Screen
Polyester tape separator +
Aluminium/Polyester tape + flexible tinned copper drain wire (0,51mm)
5. Outer sheath
Thermoplastic compound halogen free
Colour: Green
Technical characteristics
1. Operating voltage
250V Max. A.C
300V Max. C.C
(*Not suitable for direct connection to the power supply network or other low impedance sources)
2. Test Voltage
1000 V
3. Conductor resistance
36 Ohm/Km Max.
4. Insulation resistance
1000 MOhm*Km
5. Capacitance
50±10 pFm
6. Characteristic Impedance
100 Ohm
7. Operating Tª
-15° to +70°C
Standards / Properties
1. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
2. CPR Classification (Euroclass)
Dca-s2,d2,a1
(According UNE-EN 50575)
3. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
4. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity =< 10µS/mm)
5. Low smoke emission
UNE-EN 61034 (IEC 61034)