connection cable cervicord h07v r cpr

Single core cables without cover for fixed installations. Installed in ducts (located on surface or recessed) or in similar closed systems. They are also suitable for fixed installations protected, lighting and switchgear control and control for voltages up to 1000V (inclusive) in alternating current or up to 750V with respect

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Connection Cable Cervicord H07V-R CPR
~\ImgCli\no-foto.jpg
Single core cables without cover for fixed installations. Installed in ducts (located on surface or recessed) or in similar closed systems. They are also suitable for fixed installations protected, lighting and switchgear control and control for voltages up to 1000V (inclusive) in alternating current or up to 750V with respect to ground in direct current. According to the Low Voltage Regulation REBT 2002: ITC-BT-09 ,20, 26, 27, 30, 31, 41.
No propagador de la llama
Construction
1. Conductor
bare copper wires
Class II according UNE-EN 60228
2. Insulation
PVC (Type TI1)
Identification: Colours
Technical characteristics
1. Operating voltage
450/750 V
2. Test Voltage
2500 V
3. Operating Tª (conductor)
Fixed installation: -5°C to +70°C
During installation and handling: +5°C
Storage: +40°C
Cortocircuito (Max. 5seg): +160°C
4. Min. bending radius
4xD (Diameter <= 8 mm)
5xD (Diameter <= 12 mm)
6xD (Diametar > 12 mm)
Standards
1. Ref. standard for drawing
UNE-EN 50525-2-31
2. CPR Classification (Euroclass)
Eca
(According UNE-EN 50575)
3. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)