Wiring cable Cerviflam H05Z1 K AS

Unsheathed single-core cables with flexible conductor and halogen-free thermoplastic insulation, for internal wiring. For fixed and protected installations inside appliances and luminaires. Suitable for installations carried out in conduits placed on the surface or embedded, only in the case of signaling or control circuits. Specially recommended in locations where a

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Wiring cable Cerviflam H05Z1-K (AS)
~\ImgCli\FOTO2_216.jpg
Unsheathed single-core cables with flexible conductor and halogen-free thermoplastic insulation, for internal wiring. For fixed and protected installations inside appliances and luminaires. Suitable for installations carried out in conduits placed on the surface or embedded, only in the case of signaling or control circuits. Specially recommended in locations where a low level of smoke and corrosive gases in case of fire is required.
No propagador de la llama
Libre halogenos
Humos baja opacidad
Flexible
Baka corrosividad gases
Construction
1. Conductor
Flexible bare copper wires
Class V Acc. to UNE-EN 60228
2. Insulation
Halogen free compound
Identification: Colours (See attached table)
Technical characteristics
1. Operating voltage
300/500 V
2. Test Voltage
2000 V
3. Operating Tª (conductor)
Fixed installation: -15°C to +70°C
During installation and handling: +5°C
Shor-circuit (Max. 5seg): +160°C
4. Min. bending radius
4xD (Diameter <= 8 mm)
5xD (Diameter <= 12 mm)
6xD (Diameter > 12 mm)
Standards / Properties
1. Ref. standard for drawing
UNE-EN 50525-3-31
2. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
3. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
4. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity =< 10µS/mm)
5. Low smoke emission
UNE-EN 61034 (IEC 61034)