Cable Servo motors Cerviflex PEPUR C Power Control

Power cable suitable for servo motor control accuracy. The cables have been specially designed for use in power chains, automatic handling, robots, machine tools and processing machines and machining. The materials used guarantee resistance to mineral oils, greases, coolants and hydraulic fluids. Low capacity cables equipped with protective shield against

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Servo motors Cerviflex PE/PUR-C (Power Control)
~\ImgCli\FOTO2_1077.jpg
Power cable suitable for servo motor control accuracy. The cables have been specially designed for use in power chains, automatic handling, robots, machine tools and processing machines and machining. The materials used guarantee resistance to mineral oils, greases, coolants and hydraulic fluids. Low capacity cables equipped with protective shield against electromagnetic interference (EMC). Polyurethane cover to increase resistance to abrasion and weathering.
Protegido electromagneticas
No propagador de la llama
Libre halogenos
Hidrocarburos
Flexible
Desina
Cadenas portacables
Resistente bajas temperaturas
Resistente aceites
Resistente agua
Resistente productos químicos
Construction
1. Conductor
Extra flexible bare copper wires
Class VI Acc. to UNE-EN 60228
2. Insulation
Polyolefin (UL-CSA Standards)
Identification:
Power: Black numbered (1-2-3) + Yellow/green
Control:
· 1 pair: Black, White
· 2 pairs: Black numbered (5-6, 7-8)
3. Composition
Power: Insulated Conductors
Control: Twisted pairs
4. Pair Screen
Individually over every control pair:
Tinned copper wire braid
Coverage: 85%
5. Assembly
Screened control pairs and power insulated conductors cabled together + wrapping of non woven tape over the set with eventual fillings in the interstices
6. Overall screen
Tinned copper wire braid
Coverage: 85%
+ non woven tape
7. Outer sheath
Polyurethane (UL-CSA Standards)
Orange RAL 2003 according DESINA
Technical characteristics
1. Operating voltage
1000 V (Sections from 1,0mm²)
2. Test Voltage
4000 V (Sections from 1,0mm²)
3. Operating Tª (conductor)
-40°C to +80°C
4. Min. bending radius
Fixed installation: 5xD
Moving cable:
· From 1,5mm² to 16mm²: 7,5xD
· From 25mm²: 10xD
5. Maximum chain speed
300 m/min
6. Maximum acceleration
50 m/s²
7. Maximum chain length
10 m (horizontal)
8. Bending cycles, max.
6.000.000
Standards / Properties
1. Reference standards
UL File No: E83517
According UL 758, UL 1581 and CSA 22.2 210.2
(UL 80° 1000V - CSA AWM I/II A/B 80°C 1000V)
According NFPA 79-2012 Chapter 12.9
2. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1) ; CEI 20-35 ; UL VW-1 ; CSA FT1
3. Halogen free
UNE-EN 60754-1 (IEC 60754-1) ; CEI 20-37
4. Oil and hydrocarbon resistant
UL 1581 ; VDE 0472 part 803 A/B ; HD 22.10 S1 ; CNOMO E.03.40.150N
5. Water resistant
UL 1581 ; IEC 60811