Shielded Cable Cervitronic PAR POS 250V

Flexible data transmission cable for use in instrumentation systems of industrial processes in fixed installations. Specially recommended when a good electromagnetic protection as well as a good autonomy of each of the pairs is required thanks to the individual shielding on each of them.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Shielded Cable Cervitronic PAR POS 250V
~\ImgCli\FOTO2_1123.jpg
Flexible data transmission cable for use in instrumentation systems of industrial processes in fixed installations. Specially recommended when a good electromagnetic protection as well as a good autonomy of each of the pairs is required thanks to the individual shielding on each of them.
Protegido electromagneticas
No propagador de la llama
Flexible
Construction
1. Conductor
Flexible tinned copper wires
2. Insulation
PE (Polyethylene)
Identification: See attached colour table
3. Composition
Twisted pairs with individual screen laid up together (15-20 turns/m Min)
4. Individual screen
Aluminium/polyester tape + flexible tinned copper drain wire
Overlap: 25%
Coverage: 100%
5. Overall screen
Aluminium/polyester tape + flexible tinned copper drain wire
Overlap: 25%
Coverage: 100%
6. Outer sheath
PVC (Polyvinyl chloride)
Colour: Grey (Similar to RAL 7032)
Technical characteristics
1. Operating voltage
250 V
(Not to be used for direct connection to main power network or other low impedance sources)
2. Test Voltage
1000V
3. Capacitance
100 pF/m Max.
4. Operating Tª (conductor)
-15°C to +70°C
5. Min. bending radius
8xD
Standards / Properties
1. Ref. standard for drawing
Based on UNE 212016
2. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)