cable cervicom profinet cat5e 2x2xawg22

Category 5e high-speed cable for Industrial Ethernet. Suitable for fixed installations, both dry and wet.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Cervicom Profinet Cat.5e 2x2xAWG22
~\ImgCli\FOTO2_1418.jpg
Category 5e high-speed cable for Industrial Ethernet. Suitable for fixed installations, both dry and wet.
Protegido electromagneticas
Profi net
No propagador de la llama
Hidrocarburos
Desina
Resistente aceites
Resistente agua
Technical characteristics
1. Operating voltage
30 V
2. Test Voltage
700 v
3. Min. bending radius
Fixed installation: 5xD
4. Operating Tª (conductor)
-20°C +80°C (Use and installation)
5. Insulation resistance
500 MOhm*Km Min.
6. Conductor resistance
60 Ohm/Km (Max. at 20°C)
7. Characteristic Impedance
100 ±15 Ohm
8. Transmission speed
100 Mbit/s (Max. length 100m) ; 10 Mbit/s (Max. length 500m)
9. Nominal capacitance
56 pF/m (cond-cond)
10. Transfer Impedance
20 mOhm/m Max.
Construction
1. Conductor
Bare copper wire
Diameter: 0,64mm
2. Insulation
Polyolefin
Identification: White, Yellow, Blue, Orange
3. Assembly
Four insulated conductors laid up together as a star quad + plus polyester tape wrapping
4. Outer sheath
PVC
Colour: Green (RAL 6018) according to DESINA
5. Inner sheath
PVC
Aprox. diameter: 3,9 mm
Colour: Black
6. Overall screen
Aluminium/polyester tape +
Tinned copper wire braid
Coverage: 80% Min.
Standards / Properties
1. Flame Retardant
CEI 20-35 ; EN 50265 ; IEC 60332-1 ; UL VW-1 ; CSA FT1
2. Oil and hydrocarbon resistant
UL 1581; VDE 0472 p.803 A/B; HD 22.10 S1;CNOMO; E.03.40.150N
3. Water resistant
UL 1581 - IEC 60811
4. Ref. standard for drawing
UL 80°C 30C Style 2502 ; CSA AWM I/II A/B 80°C 30V