cable servo motors cerviflex pepur c power

Power cable suitable for servomotors. The cables have been specially designed for use in cable drag chains, handling automation, machine tools and machines for transformation and machining. The materials used are resistant to mineral oils, greases, coolants and hydraulic fluids. Cables with low capacitance and protected against electromagnetic interference (EMC).

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Servo motors Cerviflex PE/PUR-C (Power)
~\ImgCli\FOTO2_584.jpg
Power cable suitable for servomotors. The cables have been specially designed for use in cable drag chains, handling automation, machine tools and machines for transformation and machining. The materials used are resistant to mineral oils, greases, coolants and hydraulic fluids. Cables with low capacitance and protected against electromagnetic interference (EMC). Polyurethane outer sheath abrasion and weather resistant.
Protegido electromagneticas
No propagador de la llama
Libre halogenos
Hidrocarburos
Flexible
Desina
Cadenas portacables
Resistente aceites
Resistente agua
Technical characteristics
1. Operating voltage
1000 V (Sections from 1,0mm²)
2. Test Voltage
4000 V (Sections from 1,0mm²)
3. Min. bending radius
Fixed installation: 5xD
Moving cable:
· From 1,5mm² to 16mm²: 7,5xD
· From 25mm²: 10xD
4. Operating Tª (conductor)
-40°C to +80°C
5. Bending cycles, max.
6.000.000
6. Maximum chain speed
300 m/min
7. Maximum acceleration
50 m/s²
8. Maximum chain length
10 m (horizontal)
Construction
1. Conductor
Extra flexible bare copper wires
Class VI Acc. to UNE-EN 60228
2. Insulation
Polyolefin (UL-CSA Standards)
Identification:
Power: Black numbered (1-2-3) + Yellow/green
3. Assembly
Insulated conductors laid up together in concentric layers + wrapping of nonwoven tape with eventual fillers in the interstices
4. Outer sheath
Polyuethane (UL-CSA Standards)
Orange RAL 2003 according DESINA
5. Overall screen
Tinned copper wire braid
Coverage: 85% + nonwoven tape on the shield
Standards / Properties
1. Ref. for construction/drawing
According to UL 758, UL 1581 and CSA 22.2 210.2
(UL 80° 1000V - CSA AWM I/II A/B 80°C 1000V)
According to NFPA 79-2012 Chapter 12.9
2. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1) ; CEI 20-35 ; UL VW-1 ; CSA FT1
3. Halogen free
UNE-EN 60754-1 (IEC 60754-1) ; CEI 20-37
4. Oil and hydrocarbon resistant
UL 1581 ; VDE 0472 part 803 A/B ; HD 22.10 S1 ; CNOMO E.03.40.150N
5. Water resistant
UL 1581 ; IEC 60811