cable extraflexible cerviflex chain pepur c hf

Shielded power and control cable designed for use in industrial processes. Extraflexible and with high resistance to abrasion and flexion in dynamic installations, especially recommended for use in cable chains when good electromagnetic protection is required. Likewise, du to its UV radiation, ozone, and humidity resistance, the cable can also

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Extraflexible Cerviflex CHAIN PE/PUR-C HF
~\ImgCli\FOTO2_520.jpg
Shielded power and control cable designed for use in industrial processes. Extraflexible and with high resistance to abrasion and flexion in dynamic installations, especially recommended for use in cable chains when good electromagnetic protection is required. Likewise, du to its UV radiation, ozone, and humidity resistance, the cable can also be used in outdoor applications.
Protegido electromagneticas
No propagador de la llama
Libre halogenos
Hidrocarburos
Flexible
Desina
Cadenas portacables
Resistente aceites
Resistente agua
Resistente UV
Resistente ozono
Construction
1. Conductor
Extra flexible bare copper wires
Class VI Acc. to UNE-EN 60228
2. Insulation
Polyolefin (UL-CSA Standards)
Identification: Black numbered + Yellow/Green
3. Assembly
· Up to 12 conductors: In concentric crowns
· > 12 conductors: In sets
Non-woven textile tape casing over the assembly
4. Overall screen
Tinned copper wire braid
Coverage: 85%
+ non-woven textile tape wrap over the screen
5. Outer sheath
Polyurethane (UL-CSA Standards)
Grey RAL 7040 according DESINA
(*Other colours on request)
Technical characteristics
1. Operating voltage
300 V : Sections from 0,5mm² (AWG21) to 1,0mm² (AWG18)
1000 V : Sections > 1,0mm² (AWG18)
2. Test Voltage
2000 V : Sections from 0,5mm² (AWG21) to 1,0mm² (AWG18)
3000 V : Sections > 1,0mm² (AWG18)
3. Operating Tª (conductor)
-40°C to +80°C
4. Min. bending radius
Fixed Installation: 5xD
Moving cable:
· From 1,5mm² to 16mm²: 7,5xD
· From 25mm²: 10xD
5. Characteristics in dynamic installations
Maximum speed: 300 m/min
Maximum acceleration: 50 m/s²
Maximum lenght of the chain: 15 m (horizontal)
Life cycle in flexion: 6.000.000
Standards / Properties
1. Ref. for construction/drawing
According NFPA 79-2012 Chapter 12.9
According UL 758, UL 1581 and CSA 22.2 210.2
· Sections of 0,5mm² (AWG21) and less than 1,0mm² (AWG18): UL 80° 300V - CSA AWM I/II A/B 80°C 300V
· Sections from 1,0mm² (AWG18), included: UL 80° 1000V - CSA AWM I/II A/B 80°C 1000V
2. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
CEI 20-35
UL VW-1
CSA FT1



3. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
CEI 20-37

4. Oil and hydrocarbon resistant
UL 1581
VDE 0472 part 803 A/B
HD 22.10 S1
CNOMO E.03.40.150N

5. Water resistant
UL 1581
IEC 60811