cat 6 cable cervicom data uftp lshf patch flexible

Flexible screened halogen-free cable for Category 6 data transmission in local area networks (LAN), suitable for the work area (computers) and panel wiring.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cat. 6 - Cable Cervicom DATA U/FTP LSHF PATCH (Flexible)
~\ImgCli\FOTO2_1326.jpg
Flexible screened halogen-free cable for Category 6 data transmission in local area networks (LAN), suitable for the work area (computers) and panel wiring.
Protegido electromagneticas
No propagador de la llama
Libre halogenos
Humos baja opacidad
Baka corrosividad gases
Technical characteristics
1. Test Voltage
1000 V (DC, 1 min)
2. Weight
26 Kg/Km
3. Outer diameter
5,7 mm
4. Min. bending radius
Fixed installation (without load): 25mm
During installation (with load): 50mm
5. Insulation resistance
2000 MOhm*Km Min. (500V)
6. Characteristic Impedance
100 ± 5 Ohm (at 100 MHz)
7. Velocity of propagation
79%
8. Operating Tª
Fixed installation: -20°C to +60°C
During installation: 0°C to +50°C
9. Resistance unbalance
3% Max.
10. Capacitance unbalance
1500 pF/Km Max. (Pair-Ground)
11. Loop resistance
340 Ohm/Km Max.
12. Mutual capacitance
Nominal 43 pF/m (at 800Hz)
13. Propagation delay
Nominal 427 ns/100m
14. Transfer Impedance
Max. 50 mOhm/m (at 1 MHz)
Max. 100 mOhm/m (at 10 MHz)
Max. 200 mOhm/m (at 30 MHz)
15. Coupling attenuation
55 dB
Construction
1. Conductor
Stranded bare copper wires
Diameter: 0,42 mm (AWG27/7)
2. Insulation
FoamSkin PE (Foam polyethylene)
Diameter: 0,98 mm
3. Assembly
4 shielded pairs laid up together
4. Composition
Two insulated conductors twisted together as a pair
5. Overall screen
-
6. Outer sheath
Halogen free compound
Colour: Grey
7. Pair Screen
Aluminium/Polyester tape in "S" shape helically applied on two pairs covering each of them individually + flexible tinned copper drain wire
Standards / Properties
1. Flame Retardant
UNE-EN 603332-1 (IEC 60332-1)
2. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
3. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity =< 10µS/mm)
4. Low smoke emission
UNE-EN 61034 (IEC 61034)
5. Ref. standard for drawing
EN 50173-1; EN 50288-5-2
ISO/IEC 11801; IEC 61156-6
TIA/EIA-568-C.2