cable shielded cerviflex vc4v k 300500v cpr

Flexible instrumentation and control cable for use in fixed installations. With copper wire braid screen, especially recommended for locations where good protection against electromagnetic interference is required.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Shielded Cerviflex VC4V-K 300/500V CPR
~\ImgCli\FOTO2_201.jpg
Flexible instrumentation and control cable for use in fixed installations. With copper wire braid screen, especially recommended for locations where good protection against electromagnetic interference is required.
Protegido electromagneticas
No propagador de la llama
Flexible
Technical characteristics
1. Operating voltage
300/500 V
2. Test Voltage
2000 V
3. Min. bending radius
10xD
4. Operating Tª
Fixed installation: -15°C a +70°C
During installation: 0°C Mín.
Short-circuit (Max. 5 seg): 160°C
Construction
1. Conductor
Flexible bare copper wires
Class V according to UNE-EN 60228
2. Insulation
PVC (Type TI52)
Identification:
Up to 5 Cond: HD 308 (See table atached)
>5 Cond: Black numbered + Yellow/Green
3. Assembly
Insulated conductors laid up together in concetrical layers
4. Outer sheath
PVC (Type TM51)
Standard colour: Negro
5. Screen
Separator of Polyester tape +
Bare copper wires braid
Coverade: 60% aprox.
Standards
1. CPR Classification (Euroclass)
Eca
(According to UNE-EN 50575)
Standards / Properties
1. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
2. Ref. standard for drawing
Based on EN 50288-7