cable cerviflam z1z1 k as 061kv

Flexible instrumentation and control cable designed for use in industrial processes in fixed installations. Specially recommended when no halogen emission in case of fire is required.

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Cerviflam Z1Z1-K (AS) 0,6/1kV CPR
~\ImgCli\FOTO2_258.jpg
Flexible instrumentation and control cable designed for use in industrial processes in fixed installations. Specially recommended when no halogen emission in case of fire is required.
No propagador de la llama
No propagador incendio
Libre halogenos
Humos baja opacidad
Flexible
Baka corrosividad gases
Construction
1. Conductor
Bare copper wires, flexible
Class V Acc.to/UNE-EN 60228
2. Insulation
Halogenfree compound
Identification: HD 308 S2 (See attached table)
3. Composition
Insulated conductors laid up together
4. Outer sheath
Halogenfree compound
Colour: Green
Technical characteristics
1. Operating voltage
600/1000 V
2. Test Voltage
3500 V
3. Operating Tª (conductor)
Service: -15°C a +70°C
During instalation: 0°C Min.
Short-circuit (Max. 5 seg): 160°C
4. Min. bending radius
6xD
Standards / Properties
1. Ref. standard for drawing
Special design, based on IEC 60502-1
2. CPR Classification (Euroclass)
Eca
(According to UNE-EN 50575)
*IMPORTANT NOTE: This information (CPR classification) must be confirmed in case of order against existing stock at that time.
3. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
4. Fire Retardant
UNE-EN 60332-3 (IEC 60332-3)
5. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
6. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductividad =< 10µS/mm)
7. Low smoke emission
UNE-EN 61034 (IEC 61034)