cerviflam power cable rz1 k as 061 kv cpr

Flexible cable for the transmission and distribution of electrical energy in fixed installations. Designed to have an intrinsic resistance to fire, especially recommended in public places (according to ITC-BT 28) in installations where it is required to maintain the integrity of the circuit in case of fire, such as signaling

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cerviflam Power Cable RZ1-K (AS+) 0,6/1 kV CPR
~\ImgCli\FOTO2_890.jpg
Flexible cable for the transmission and distribution of electrical energy in fixed installations. Designed to have an intrinsic resistance to fire, especially recommended in public places (according to ITC-BT 28) in installations where it is required to maintain the integrity of the circuit in case of fire, such as signaling circuits, detection and alarms, circuits for evacuation services and firefighting, etc....
Resistente fuego
No propagador de la llama
No propagador incendio
Libre halogenos
Humos baja opacidad
Flexible
Baka corrosividad gases
Construction
1. Conductor
Flexible bare copper wires
Class V Acc. to UNE-EN 60228
2. Insulation
XLPE (Type DIX-3) with mica tape or alternatively Silicone type EI2 (Cable type SZ1-K AS+)
Identification: HD 308 (See colour table)
3. Assembly
Insulated conductors laid up together in concentric layers
4. Outer sheath
Halogen free compound
Colour: Orange
Technical characteristics
1. Operating voltage
600/1000 V
2. Test Voltage
3500 V
3. Operating Tª
-15°C a +90°C (During installation: 0°C Minimum)
Shortcut temperature: 250°C (5seg)
4. Min. bending radius
5xD
Standards / Properties
1. Reference standards
IEC 60502-1
2. CPR Classification (Euroclass)
Cca-s1b,d1,a1
(According to UNE-EN 50575)
3. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
4. Fire Retardant
UNE-EN 60332-3 (IEC 60332-3)
5. Fire resistant
PH120 (120 minutes at 840°C), according:
· Diameter up to 20mm: EN 50200, IEC 60331-2
· Diameter from 20mm: EN 50362, IEC 60331-1
6. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity <= 10µS/mm)
7. Low smoke emission
UNE-EN 61034 (IEC 61034)
8. Halogen free
UNE-EN 60754-1 (IEC 60754-1)