cable cervifire as pos 300500v cpr

Flexible shielded cable for fixed fire safety installations, where a good fire performance is required. Suitable for installation according to RSCIEI 2267/2004 (Regulation of fire safety in industrial establishments)

See only CPR
See by cable type
See by fire behaviour

If you need technical support complete the form or call us at (+34) 937 362 730

Support
Cable Cervifire (AS) POS 300/500V CPR
~\ImgCli\FOTO2_668.jpg
Flexible shielded cable for fixed fire safety installations, where a good fire performance is required. Suitable for installation according to RSCIEI 2267/2004 (Regulation of fire safety in industrial establishments)
Protegido electromagneticas
No propagador de la llama
No propagador incendio
Libre halogenos
Humos baja opacidad
Flexible
Baka corrosividad gases
Construction
1. Conductor
Flexible bare copper wires
Class V Acc. to UNE-EN 60228
2. Insulation
Halogen free compound
Identification:
2 conductors: Red, Black.
3 conductors: Red, Black, White.
4 conductors: Red, Black, White, Green.
3. Assembly
Insulated conductors laid up together (Aprox. 10/12 turns/meter)
4. Screen
Aluminium/Polyester tape + tinned copper drai wire
Coverage: 100%
5. Outer sheath
Halogen free compound
Colour: Red
Technical characteristics
1. Operating voltage
300/500V
(*Not suitable for direct connection to the power supply network or other low impedance sources).
2. Test Voltage
2000V
3. Operating Tª (conductor)
Fixed installation: -15°C to +70°C
During installation: 0°C Min.
4. Min. bending radius
10xD
Standards / Properties
1. Ref. standard for drawing
EN 50288-7
2. CPR Classification (Euroclass)
Cca-s1b,d1,a1 (According to UNE-EN 50575)
3. Flame Retardant
UNE-EN 60332-1 (IEC 60332-1)
4. Fire Retardant
EN 50399
5. Halogen free
UNE-EN 60754-1 (IEC 60754-1)
6. Low corrosivity
UNE-EN 60754-2 (IEC 60754-2)
(pH >= 4,3 ; conductivity =< 10µS/mm)
7. Low smoke emission
UNE-EN 61034 (IEC 61034) (Transmittance > 60%)